Enhanced TDS
Identification & Functionality
- Chemical Family
- Manufactured By
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Key Features
- The additive improves the scratch resistance, creates a soft feel effect and has a matting effect.
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Coating End Applications
- Use Level
- 1 - 4%
- Incorporation and Processing Instructions
The additive is preferably incorporated into the coating at the end of the production process at low shear rate. Mix well before use.
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Volatile Organic Compounds - Free max. 1500 ppm - pH Value 8.5 - - Viscosity (at 23°C, D=200/s) 150 mPa.s - Particle Size 25 μm Hegman Non-Volatile Matter (60 min, at 125°C) 35 % - - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Initial Boiling Point (at 1013hPa) 100.0 °C Melting Point (at 1013 hPa) 2 °C - Density (at 20°C, 1013 hPa) 1 g/cm³ - Dynamic Viscosity (at 23°C) 150 mPa.s DIN 53019 Appearance Dispersion - - Color White - off-white - - Melting Point (Wax component) 135 °C - Flammability (liquids) Will not burn - - Miscible in Water - - Odor Characteristic - - pH (at 20°C) 8.5 - - - Compatibility
- Dispersion of an oxidized HD polyethylene wax
- Note
- Opened containers may lead to the additive drying out inside the container. Since such dried additive residues can cause defects in the end product, the additive must be homogenized and filtered before use.
Regulatory & Compliance
- OEM Specifications
Storage & Handling
- Storage Information
- Temperature sensitive.To be stored and transported between 5 °C and 35 °C. Stir before use.