Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Manufactured By
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Markets
- Applications
- Application Area
- Coating End Applications
- Ink & Toner End Applications
- Application Information
Coatings and Printing Inks
Special Features and BenefitsImproves the abrasion resistance of printing inks. In aqueous coatings it improves the scratch resistance, resistance to black heel marking, anti-blocking and the soft feel effect. The additive has a matting effect.
Recommended Levels
3-6% additive (as supplied) based upon total formation.
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
Incorporation and Processing Instructions
The additive is preferably incorporated into the coating at the end of the production process at low shear rate. Mix well before use.
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions pH Value 9.5 - - Particle Size Distribution 25 μm Hegman Non-Volatile Matter (60 min, at 125°C) 35 % - Melting Point (Wax component) 130 °C - Viscosity (at 23°C, D=200/s) 175 mPa.s - - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point 100 °C - Melting Point 2 °C - Density (at 20°C, 1013 hPa) 1 g/cm³ - Dynamic Viscosity 175 mPa.s - Appearance Dispersion - - Color Off-white - - Flammability (liquids) Will not burn - - Miscible in Water - - pH (at 20°C, Concentration: 100%) 9.5 - Composition Data
Dispersion of an oxidized HD polyethylene wax
- Note
Opened containers may lead to the additive drying out inside the container. Since such dried additive residues can cause defects in the end product, the additive must be homogenized and filtered before use.
Regulatory & Compliance
- OEM Specifications
Storage & Handling
- Storage and Transportation
Temperature sensitive.To be stored and transported between 5 °C and 35 °C. Stir before use.