Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Manufactured By
- CASE Ingredients Functions
- Fluids & Lubricants Functions
- Industrial Additives Functions
- Plastics & Elastomers Functions
- Molecular formula
- C₄H₄ClNOS, C₅H₆CL₂N₂O₂
- Technologies
- Product Families
- Chemical Structure
Features & Benefits
- Labeling Claims
- Industrial Additives Features
- Product Benefits
• No VOC
• Effective use range pH 3-8
• Copper free stabilizer
• Aqueous solution readily incorporated into industrial formulations.
• Rapid inhibition of microbial growth and enzyme synthesis
• Formaldehyde free
• Biodegradable/non- persistent in the environment
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Fluids & Lubricants Type
- Adhesive & Sealant End Applications
- Coating End Applications
- Fluids & Lubricants End Use
- Industrial Additives End Use
- Product Application
Bionix® ISO14 can be dosed directly either by open pouring (not approved for cooling water treatment) or by metered pump either intermittently or on a continuous basis. Bionix® ISO14 is best added after any heating stage or when the product has cooled below 40°C. Care should be taken to ensure that the temperature, pH and redox potential at the point of addition are suitable for the stability of the product.
Water treatment
• Air washers and industrial /recirculating cooling water towers, industrial recirculating closed loop water cooling systems, industrial recirculating water cooling towers, paint spray booths, ultra filtration units and non-medical/no- potable reverse osmosis systems, brewery pasteurizers and can warmers.
Paper mills
• Paper mill slimicide. Typical addition points are the beaters, hydropulper or fan or broke storage pumps.
General preservative
• Paints and coating preservation, such as paper and wood coatings and paints used for architectural product finishes and special-purpose coatings, adhesive and tackifier preservation such as animal glues, vegetable glues, natural rubber, latices, polyvinyl acetate, stirene butadiene and acrylic latices, polymer latex preservation, including acrylic, stirene/butadiene, carboxylated styrene/butadiene, ethylene-vinyl acetate, biopolymers, zanthan gum, gum arabic, guar gum, protein-derived polymers, starches, casein derived polymers latices and solutions polymers, photoplate processing, fountain solutions and ink/ink components, wood and wood products, liquid and semi-solid/ solid household, consumer, industrial janitorial products, metal working fluid preservation, metal cleaning fluid preservation, electrodeposition paint components, buiding materials.
Oil/gas production
• Oilfield injection waters, enhanced recovery injection fluids, drilling, fracturing and completions fluids.
Properties
- Physical Form
- Soluble In
- Appearance
- Clear yellow liquid
- Physical Properties
Value Units Test Method / Conditions Soluble in Water - - Density 10.84 - - Specific Gravity 1.3 - - Boiling Point 100 °C - pH Value 2.0 - 4.0 - - Molecular Weight MIT 149.5947 - - Molecular Weight CMIT 115.1496 - - - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Viscosity 16 cPs - Partition Coefficient (Octanol/water) 0.401 - - Density 1.27 - 1.33 g/ml - Vapor Density (Air = 1) 0.62 - - Evaporation Rate max. 1 - - Boiling Point 100 °C Derived Melting Point -33 °C - Odor Mild - - Appearance Clear, yellow - - Physical Form Liquid - - Soluble in Water - - - CFR Clearances
21 CFR 175.105 Adhesives 21 CFR 175.300 As an antimicrobial agent in emulsion-based silicon coatings at a level not to exceed 50 mg active ingredient /Kg in the coating formulation
21 CFR 175.320 As an antimicrobial agent in emulsion-based silicon coatings at a level not to exceed 50 mg active ingredi ent/Kg in the coating formulation
21 CFR 176.170 Cleared for use as antimicrobial agent for finished coatings and for additives used in the manufacture of paper and paperboard including fillers, binders, pigment slurries and sizing solutions not exceeding 25ppm active. Cleared for use as an antimicrobial agent for polymer latex emulsions in paper coatings not exceed ing 50ppm active in the coating formulation.
21 CFR 176.180 Cleared for use as antimicrobial agent for finished coatings and for additives used in the manufacture of paper and paperboard including fillers, binders, pigment slurries and sizing solutions not exceeding 25ppm
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
- Packaging Information
TYPE LBS KG 5 gal. Pails, 32 Pails/pallet 50 lbs 23 kg 15 gal. Drum, 9 Drums/pallet 155 lbs 70 kg 30 gal. Drum, 5 Drums/pallet 305 lbs 138 kg 55 gal. Drum. 4 Drums/pallet 555 lbs 252 kg 275 gal. Tote 2,755 lbs 1250 kg Bulk 41,325 lbs 18744 kg
Storage & Handling
- Storage Information
• Keep container tightly closed in a dry and well-ventilated place. Do not store near combustible materials. Avoid extreme temperatures. Do not expose to direct sunlight or ultraviolet light. Avoid strong oxidizing agents, mild steel, aluminum, copper an other materials.
• Always wear personal protective equipment (PPE) when handling BIONIX ISO14. While the selection of PPE depends on the task to be performed, the environment and the engineering controls in place, the following is the minimum PPE to be worn when handling containers of the product: splash proof chemical goggles, chemical resistant gloves which extend about the wrist, long sleeve shirt and long pants, socks and chemical resistant footwear.