Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Manufactured By
- CASE Ingredients Functions
- Industrial Additives Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Polymers & Resins
- Adhesive & Sealant End Applications
- Use Level
- 0.1 - 0.5%
- Product Application
Coatings Industry
Special Features and Benefits
- The defoamer is used in all emulsion paints and plasters, especially in PVC ranges between 50 and 85.
- It features an excellent cost/performance ratio and contains a paint-compatible silicone that reinforces the defoaming effect.
Recommended Use
- The defoamer is particularly recommended for emulsion paints / exterior wall paints and emulsion plasters.
- It may also be used in the production of emulsion binders.
Incorporation and Processing Instructions
- Generally, 2/3 of the defoamer are added to the millbase and 1/3 is added to the letdown or the finished paint.
- Sufficient shear forces are necessary for incorporation in order to avoid negative side effects.
Adhesives
Special Features and Benefits
The defoamer can be used used in any emulsion adhesive. It features an excellent cost/performance ratio and contains a compatible silicone that reinforces the defoaming effect.
Recommended Use- The defoamer is particularly recommended for emulsion adhesives on the basis of polyacrylates and polyurethanes.
- It is also very effective in adhesives based on polyvinyl alcohol. It may also be used in the production of emulsion binders.
Incorporation and Processing Instructions
- The defoamer should be added to the binder as early as possible.
- Sufficient shear forces are necessary for incorporation in order to avoid negative side effects.
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Density (at 20°C) 0.94 g/ml - Non-Volatile Matter (10 min, at 150°C) 53.5 % - Volatile Organic Compound Content max. 1500 ppm - - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Kinematic Viscosity (at 40°C) 286 mm²/s Dynamic Viscosity (at 40°C) 266 mPa.s P/K 40°C Dynamic Viscosity (at 20°C) 700 mPa.s 11 (NV, at 20°C) Ignition Temperature min. 392.00 °F M0062, Analytics Wesel Density (at 20°C) 0.935 g/cc 4 (Oscillating U-tube, at 20°C) Immiscible in Water - - Vapor Pressure (at 20°C) 24 hPa Derived Density (at 40°C) 0.928 g/cm³ 5 (40°C Oscillating U-tube) Initial Boiling Point 212 °F Derived Melting Point 32 °F Derived pH Value (at 20°C, 100 % Concentration) 7 - - Color White - - Appearance Liquid - - - Composition Data
VOC-free defoamer on the basis of a mineral oil emulsion for aqueous emulsion paints, plasters and adhesives. Contains silicone.
Regulatory & Compliance
- Chemical Inventories
- OEM Specifications
Storage & Handling
- Storage and Transportation
- Storage and transport between 0 °C and 40 °C.
- Temperature-sensitive emulsion.
- If the recommended storage temperature range is exceeded or not met, the product must be checked and possibly re-emulsified at room temperature.