Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Manufactured By
- CASE Ingredients Functions
- Industrial Additives Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Application Area
- Coating End Applications
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Density (at 20°C) 0.96 g/ml - Non-Volatile Matter (10 min, at 150°C) 15 % - Flash Point 78.0 °C - Solvent Dipropylene glycol monomethyl ether - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Ignition Temperature min. 392 °F DIN 51 794/ DIN prEN 14 522 Density (at 20°C) 0.96 g/cc 4 (Oscillating U-tube, at 20°C) Lower Explosion Limit 1.3 %V - Upper Explosion Limit 8.7 %V Flash Point 78 °C 49 (Pensky-Martens) Vapor Pressure (at 20°C) max. 1 hPa Derived Initial Boiling Point 184 °C Derived Melting Point max. 5 °C Derived Miscible in Water - - pH Value (at 20°C, 1% Concentration) 7 - Universal pH-Value Indicator Color Clear - - Appearance Liquid - - - Note
Unlike so-called silicone oils, this additive is very user-friendly. However, before use, one should determine in testseries whether foam is stabilized in certain systems and check the recoatability and crater development.
- Composition Data
Solution of a polyether-modified polydimethylsiloxane
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- OEM Specifications