Enhanced TDS
Identification & Functionality
- Chemical Family
- Manufactured By
- CASE Ingredients Functions
- Composite Materials Functions
- Technologies
- Product Families
Applications & Uses
- Application Area
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Adhesive & Sealant End Applications
- Composites Processing Methods
- Use Level
- 0.25 - 1% (BMC), 0.5 - 1% (Adhesives and Sealants), 0.5 - 1% (Wetting and Dispersion)
- Application Information
SMC, BMC, Pultrusion
Special Features and Benefits
Solvent-free wetting and dispersing additive (100% active substance) to wet inorganic fillers (and inorganic pigments) in systems in which solvents need to be avoided.Recommended Levels
0.5-1% additive (as supplied) based upon fillers for wetting and dispersion.
0.25-1% additive (as supplied) based upon resin for stabilizing the viscosity in BMC.
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
Incorporation and Processing Instructions
BYK-W 9010 should be added to the resin mixture prior to homogenization and the addition of the fillers/pigments.Adhesives & Sealants
Special Features and Benefits
Solvent-free wetting and dispersing additive (100% active substance) to wet inorganic fillers (and inorganic pigments) in systems in which solvents need to be avoided.
Recommended Use
The additive is particularly recommended for adhesives based on epoxy resins and UV systems.
Recommended Levels
0.5-1% additive (as supplied) based on the filler.
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
Incorporation and Processing Instructions
For optimum performance, the additive should be added before the solids.
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Water Content 0.02 % - Density (at 20°C) 1.16 g/ml - Refractive Index (at 20°C) 1.469 - - Active Substance 100 % - Acid Value 129 mg KOH/g - - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Auto Ignition Tempertaure min. 200 °C DIN 51794 Flash Point min. 150 °C Pensky-Martens Initial Boiling Point min. 200 °C Derived Melting Point 9 °C Derived Density (at 20°C) 1.16 g/cm³ Oscillating U-tube Vapour Pressure (at 20°C) max. 1 hPa Derived Appearance Liquid - - Color Light yellow - - Flammability (liquids) Sustains Combustion - - Immiscible In Water - - Odor Odorless - - pH (at 20°C, Concentration: 1%) 1.1 - Universal pH-Value Indicator - Composition
Phosphoric acid ester
Regulatory & Compliance
- OEM Specifications
Storage & Handling
- Storage Conditions
Separation or turbidity may occur. Mix well before use. Warm to 30-40 °C and mix well.