Enhanced TDS
Identification & Functionality
- Manufactured By
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Coating End Applications
- Use Level
- 0.1 - 6% (Coatings Industry)
- Application Information
Coatings Industry
Special Features and Benefits
The additive increases surface protection and has a matting effect. It is recommended for solvent-borne and aqueous systems.Recommended Levels
0.1-6% additive (as supplied) based on the total formulation.
The above recommended levels can be used for orientation. Optimal levels are determined through series of laboratory tests.
Incorporation and Processing Instructions
The additive is preferably incorporated into the coating at the end of the production process with a low shear rate.
Special Note
Compatibility may be limited in aqueous systems without organic co-solvents (VOC-free formulations) in individual cases.
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Density 1.06 g/cm³ - Particle Size Distribution (D50) 8 μm Laser Diffraction Analyzer, Volume Distribution Particle Size Distribution (D90) 15 μm Laser Diffraction Analyzer, Volume Distribution Melting Point 115.0 °C - - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Flash Point min. 230 °C Derived Density (at 20°C, 1013 hPa) 1.06 g/cm³ - Minimum Ignition Energy (With Inductivity) 4 mJ - Appearance Micropowder - - Color White - - Dust Explosion Class St2 - - Flammability (solid, gas) Combustible Solids - - Immiscible In Water - - pH Insoluble - - - Composition
Micronized, modified polyethylene wax
Regulatory & Compliance
- OEM Specifications
Storage & Handling
- Storage Conditions
Temperature sensitive. To be stored and transported at a temperature below 50 °C.