Hybon® 2006

• Tolerates filament winding processing conditions that ordinarily result in broken filaments.
• Multi-resin compatibility eliminates the need to change creels when changing resin systems, thus minimizing downtime.
• Rapid and complete wet out.
• High wet and dry abrasion resistance.
• Excellent package transfer efficiency through the use of an outer adhesive film.
• Supported by NEG’s extensive technical resources.
• Manufacturing facilities operate quality management systems that comply with ISO 9001:2015 requirements.
• Germanischer Lloyd (GL) certified.

Product Information

Caution

To avoid the possibility of potential injury, maintain column stability by limiting pallet stacking to two (2) high as noted on individual shipping containers.

• 48 packages/pallet
• 20 kg (44 lbs.) /package

These products should be stored in a dry area with ambient temperature and relative humidity, optimally from 20°C to 25°C and between 50% and 70%, respectively. Protect product from all sources of water at all times. A First-In-First-Out (FIFO) stock control system is recommended to minimize the influence of storage conditions. Prior to use, products should be conditioned in the work area for a minimum of 24 hours. If contents of a package unit are partially used, the unit should be closed until the next use. With proper storage, there are no known limitations on the shelf life of the product. To insure optimal performance, retesting is recommended for products stored more than two years from the initial production date.