Martinal® OL - 107 - LEO

1 of 8 products in this brand
Martinal® OL - 107 - LEO is fine precipitated aluminum hydroxide (ATH) grades with significantly improved compounding performance, higher thermal stability, better powder flowability, and higher bulk density after conveying. They also offer lower compound viscosity compared to traditional grades. These products are targeted for use in polymers such as polyolefins and their copolymers, PVC, and rubber.

INCI Name: Aluminum Hydroxide

CAS Number: 21645-51-2

Chemical Family: Aluminum Compounds, Hydroxides

Synonyms: Amphojel, Dialume, Dimethicone 

  • TypeDocument Name
View All Documents

Enhanced TDS

Identification & Functionality

Features & Benefits

Applications & Uses

Markets
Applications
Applicable Processes
Application Format
Compatible Polymers & Resins
Base Chemicals End Uses
Coating End Applications
Industrial Additives End Use
Ink & Toner End Applications
Oral Care Applications
Plastics & Elastomers End Uses
Application Information

MARTINAL® OL-104 LEO™ and OL-107 LEO™ are new fine precipitated aluminum hydroxide grades with improved compounding performance, higher thermal stability, better powder flowability and higher bulk density after conveying, as well as lower compound viscosity. Target polymers are polyolefins and their copolymers, PVC and Rubber.

Properties

Physical Form
Typical Properties
ValueUnitsTest Method / Conditions
Aluminum Hydroxide Contentapprox. 99.4%-
Moisture Content (at 105°C)max. 0.4%-
Loss on Ignition (at 1200°C)approx. 34.5%-
Sodium Oxide Content (soluble)max. 0.08%-
Refractive Index1.58--
Specific Surface Area6 - 8m²/gBrunauer-Emmett-Teller
Oil Absorption28 - 33ml/100 g-
Electrical Conductivity (10% in H₂O)max. 70µS/cm-
Whitenessmin. 94.0%Elrepho 457 nm
Density2.4g/cm³-
Bulk Densitymin. 350kg/m³-
Thermal Stability (Temp. at 2% weight loss, 1 K/min)min. 220°C-
SDS Physical and Chemical Properties
ValueUnitsTest Method / Conditions
Boiling Point (at 1013 hPa)min. 2900°C-
Melting Point (at 1013 hPa)approx. 300°C-
Relative Density (at 20°C)-2.42 to 2.42--
ColorWhite--
Flammability (Solid)Not flammable--
Insoluble inWater--
OdorOdorless--
pH (10% in water)approx. 9
AppearanceSolid powder--
Particle Size Distribution
ValueUnitsTest Method / Conditions
Particle Size (d₅₀) 1.6 - 1.9 µmlaser scattering , Cilas

Regulatory & Compliance

Packaging & Availability