Enhanced TDS
Identification & Functionality
- Carrier
- Manufactured By
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Coating End Applications
- Use Level
- 0.5 - 6.0% (Coatings Industry)
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Density (at 20°C) 1.15 g/ml - Viscosity (at 20°C) 10.0 mPa.s - Particle Size Distribution (D50) 20 nm - Nanoparticle Content 25 % - Non-Volatile Matter (20 min, at 150°C) 31 % - Flash Point 45.0 °C - - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Lower Explosion Limit ca. 1.5 %V Upper Explosion Limit ca. 13.7 %V Auto Ignition Tempertaure min. 200 °C DIN 51794 Flash Point 45 °C DIN 51755, Abel-Pensky Initial Boiling Point ca. 120 °C - Density (at 20°C, 1013 hPa) 1.15 g/cm³ Coating Pycnometer Vapour Pressure (at 20°C) ca. 3.8 hPa Calculated Dynamic Viscosity (at 20°C, NV) 10 mPa.s Method 11 Appearance Dispersion - - Color Translucent - - Flammability (liquids) Sustains Combustion - - Immiscible In Water - - Odor Solvent-like - - pH (at 20°C, Concentration: 1%) 7 - Universal pH-Value Indicator - Note
Dried additive residues must be removed from the container since they can lead to seeds when introduced into the final product. The content of methoxypropanol in this NANOBYK additive is also unproblematic in 2K polyurethane formulations.
- Composition
Dispersion of surface-treated silica nanoparticles
Regulatory & Compliance
- OEM Specifications
Storage & Handling
- Storage Conditions
To be stored and transported below 40 °C. Mix well before use.