Enhanced TDS
Identification & Functionality
- Chemical Family
- Manufactured By
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Key Features
• APE Free
• Self crosslinkable
• Multi-substrate compatibility
• Superior scrub resistance
Applications & Uses
- Markets
- Applications
- Coating End Applications
- Uses
- Designed for use in low VOC flat, satin and semigloss architectural paints for indoor and outdoor applications.
- Can be used for wall primers and block fillers.
- P-525L produces hard flexible interior and exterior finishes and will produce 60° gloss level's of 60% covering interior and exterior finishes from flat through semi gloss. P525L can be applied at film thickness up to 10 mils wet allowing it to be used for semi flexible products such as dry wall primers and block fillers.
- The chemistry of P-525L provides the coating superior scrub resistance and multi- substrate compatibility. The polymer film is hard with reduced dirt pick up and has excellent water resistance when fully coalesced. Paints with 3 cycles of freeze thaw stability can be obtained properly formulated. The latex has good response to HEUR thickeners.
- Starting point formulations for both a 50 g/L VOC High Quality Flat and Semi-Gloss interior and exterior finishes are available on request. The raw materials suggested were used in the development of these formulations, but should be carefully checked before full-scale production is undertaken(2) .
Properties
- Typical Properties
Value Units Test Method / Conditions Solids Content 59 - 61 % - Glass Transition Temperature (on set) 5 °C - Minimum Film Forming Temperature max. 5 °C - pH Value 8 - 9 - - Density 8.8 - 8.9 lb/gal - Viscosity 200 - 600 cPs - - SDS Physical and Chemical Properties
Value Units Test Method / Conditions pH Value 8 - 9 - - Appearance White liquid - - Miscible in Water - - Odor Slight - - Solids Content 59 - 61 % - Dynamic Viscosity (at 25°C) 150 - 450 cPs - Specific Gravity 1.08 - - Vapor Pressure Negligible - - - Typical Polymer Composition
Value Units Test Method / Conditions Acrylic 100 % - - Limitations
- P-525L should be used alone in the formulations, blending with other latexes can jeopardize the development of film properties.
Regulatory & Compliance
- Chemical Inventories
Packaging & Availability
- Packaging Type
- Packaging Information
- 450lbs drum
- 2400lbs tote
- 45,000lbs tanker
- (weights may vary)
Storage & Handling
- Shelf Life
- 6 months
- Storage Information
- P-525L containers should be well sealed to prevent evaporation of water and the formation of skin or flakes on the surface. The emulsion should be protected from freezing.
- Store containers at 5 – 25 ̊C for not more than six months. Higher temperatures will affect quality and may cause the formation of skins, drop on pH and change of viscosity especially if the containers are not tightly closed or subjected to direct sunlight for long periods.
- It is recommended to stir the totes before using the latex to ensure homogenization and eliminate any potential settling occurring on long storage periods.