Snowtack™ SE 724G is a 51% solids, water-borne tackifier dispersion with a stabilized rosin ester system. It delivers superior adhesive performance, has a fine particle size, and is free from alkylphenol ethoxylates, using a polymeric stabilizer.

Functions: Tackifier

End Uses: Pressure Sensitive Adhesive, Waterborne Adhesive

Compatible Polymers & Resins: Acrylics, Natural Rubbers (NR), Styrene Butadiene Rubber (SBR)

Labeling Claims: APE-free, Solvent-free

Features: Excellent Adhesion, Mechanically Stable, Water Resistance

Enhanced TDS

Identification & Functionality

Manufactured By
CASE Ingredients Functions
Technologies
Product Families

Features & Benefits

Labeling Claims
CASE Ingredients Features
Product Benefits
  • Softens back hard resins to provide smooth peel
  • Improves adhesion to high and low energy surfaces
  • Compatible with acrylic, SBR and NR polymers
  • Very good mechanical stability

Applications & Uses

Markets
Applications
Compatible Polymers & Resins
Adhesive & Sealant End Applications
Product Applications
  • Water-Borne Pressure Sensitive Adhesive.
  • Paper label, filmic label and tape.
  • Modifier in cold temperature and freezer grade formulations.
  • Water-Borne Adhesive - Automotive, Building and construction.

Properties

Physical Form
Typical Properties
ValueUnitsTest Method / Conditions
Solids (at 110°C, 60 mins)51%Oven drying
Viscosity (at 20°C, 50 rpm)400mPa.sBrookfield, #3
Sieve Residuemax. 100ppm100 micron filter
Particle Size (average)1micronLaser Diffraction Analyzer
Density (at 25°C)1.02g/mL-
Softening Point37°CMetter (dried down dispersion)
pH Value (at 20°C)9pH electrode
Acid Valuemax. 25mg KOH/gTitration (dried down dispersion)
Glass Transition Point-8°CDSC (dried down dispersion)
SDS Physical and Chemical Properties
ValueUnitsTest Method / Conditions
AppearanceWhite viscous liquid--
Volatile Organic Compounds (Estimated)0.0007%(w/w)-
Specific Gravity (Estimated)1--
Percent Volatile (Estimated)3.00E-06%-
Flammability ClassCombustible--
Density (Estimated)1g/cc-
Relative Density Temperature (water = 1)20°CEstimated
Relative Density (Estimated)1--
Flash Point (Estimated)100°C-
Initial Boiling Point100°CDerived
OdorCharacteristic--
Key Properties

Snowtack™ SE724G is a 51% solids, water-borne tackifier dispersion. Like other Snowtacks, it is 100% solvent free. The resin component of Snowtack SE 724G is a high grade stabilized rosin ester system designed to provide superior adhesive performance to a wide range of substrates. The dispersion has a fine particle size with a narrow distribution curve. Snowtack™ SE724G is alkylphenol ethoxylate (APE) free. The stabilizer is Polymeric. All Snowtacks must be protected from freezing conditions

Regulatory & Compliance