Snowtack™ SE780G Water-Borne Tackifier

1 of 4 products in this brand
Snowtack™ SE780G Water-Borne Tackifier is a 55% solids, solvent-free tackifier dispersion based on rosin adduction and esterification. It contains a high-grade stabilized rosin ester designed for superior adhesive performance across various substrates. With fine particle size and narrow distribution, it is APE-free and stabilized with a polymeric system. Snowtack™ SE780G must be protected from freezing, and care should be taken to prevent foam formation during handling.

Functions: Tackifier

Chemical Family: Rosin Esters

End Uses: Pressure Sensitive Adhesive, Waterborne Adhesive

Compatible Polymers & Resins: Acrylics, Natural Rubbers (NR), Styrene Butadiene Rubber (SBR)

Labeling Claims: APE-free, Not Listed In California Proposition 65, Solvent-free

Features: Improved Cohesion, Mechanically Stable, Multi-Substrate Adhesion, Narrow Particle Size Distribution, Water Resistance

Enhanced TDS

Identification & Functionality

Chemical Family
Manufactured By
CASE Ingredients Functions
Technologies
Product Families

Features & Benefits

Labeling Claims
CASE Ingredients Features
Product Benefits
  • Compatible with acrylic, SBR and NR polymers
  • Improves adhesion to high and low energy surfaces
  • Very high cohesion
  • Very good mechanical stability
  • Good water resistance
  • APE free

Applications & Uses

Markets
Applications
Compatible Polymers & Resins
Adhesive & Sealant End Applications
Product Application
  • Water-Borne Pressure Sensitive Adhesive.
  • Paper label, filmic label and tape.
  • Water-Borne Adhesive.
  • Automotive.
  • Building and construction

Properties

Physical Form
Compatible with
Acrylic, NR Polymers, SBR Polymers
Typical Properties
ValueUnitsTest Method / Conditions
Glass Transition Point (dried down dispersion)34°CDSC
Acid Value (dried down dispersion)max. 20mg KOH/gTitration
Softening Point (dried down dispersion)83°CMettler
Density (at 25°C)1.02g/ml-
Average Particle Size0.6micronsLaser Diffraction Analyzer
Sieve Residue (100 micron filter)max. 100ppm-
pH Value (at 20°C) 9 pH electrode
Viscosity (at 50 rpm, 20°C)300mPa.sBrookfield, #3
Solid Content (at 135°C, 45 mins)55%Oven drying
SDS Physical and Chemical Properties
ValueUnitsTest Method / Conditions
Physical StateLiquid.--
FormDispersion--
ColorOpaque, white to off-white--
OdorNot available--
pH8 - 10--
Initial Boiling Point100°C-
Relative Density (at 25°C)1.02--
Solubility (water)Miscible--
Viscosity (at 20°C, 50rpm)300-Brookfield
Explosive PropertiesNot Explosive--
Flammability classCombustible IIIB estimated--
Oxidizing PropertiesNot Oxidizing--

Regulatory & Compliance