13 Products found on Omya Group
Wellpren® IM - 888 is a chlorinated polyethylene resin. It is atype of superior high performance-price ratio impact modifier and is widely usedinproduction of many types of rigid plastic products and semi-flexible products.
The materials provided at this site are provided "as is" without any warranties of any kind including warranties of merchantability, fitness for a particular purpose or of any other nature regarding the information presented in this site, or non-infringement of intellectual property.
Wellpren™ CM 3575 is a chlorinated polyethylene elastomer, serving as a special synthetic rubber.
Wellpren® IM 500 is a chlorinated polyethylene resin. It is atype of superior high performance-price ratio impact modifier and is widely usedinproduction of many types of rigid plastic products and semi-flexible products likesidings. Proper amount of Wellpren® IM 500 added into formulations of PVC, PEor PP plastic products will not only greatly enhance impact resistance but alsowill largely improve low temperature performance, weatherability, welding strengthandother performance. Wellpren® IM 500 is most suitable for substitutionof acrylic impact modifier (AIM) or blending with AIM with a certain percentagewithout adjusting the processing data and the formulation, resulting in an optimumperformance/cost solution.
Wellpren® IM - 900 series products are chlorinated polyethylene resin. It is atype of superior high performance-price ratio impact modifier and is widely usedinproduction of many types of rigid plastic products and semi-flexible products.
Avient GY - Pearl PE UV Smartbatch 69799 is a granule and masterbatch used in industrial color masterbatches.
Avient BL - LLDPE Masterbatch 108364 is a color masterbatch in granules used in industrial color masterbatches.
Aquacer® 1040 is a primary polyethylene dispersion used for formulating release agents for metal die casting.
A-C® 316A/EUR is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer, in finer powder form than A C 316, for use in waterborne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, helping to extend cutting machine lifetime. Its acid number of 16 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). In addition, may be used as a metal release agent for PVC processing and is a fusion control for PVC formulations. It will not affect clarity in transparent PVC applications. Very effective for use in processing PVC regrind.
Hordamer PE 02 is a polyethylene primary dispersion used for formulating release agents in metal die casting. It enhances surface protection in aqueous care products, improves adhesion in dispersion adhesives, and serves as an anti-caking additive in thermoplastics and hot-melt adhesives. Additionally, it acts as a wetting and dispersing agent for thermoplastic color masterbatches.
A-C® 617 - A is a low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar and abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. In PVC applications it finds use as an external lubricant.
A-C® 629 is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar and abrasion resistance and increased slip.
A-C® 629 - A is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It is a pigment dispersing agent for color masterbatch. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar and abrasion resistance and increased slip.
Avient FDM - 97516 WT LLDPE Masterbatch is a granule and masterbatch used in industrial color masterbatches.
