Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Manufactured By
- CASE Ingredients Functions
- Cleaning Ingredients Functions
- Industrial Additives Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Industrial Additives Features
- Benefits
- Aqueous dispersion for easy incorporation
- Robust combination of actives in one drum
- Fast-acting and long-lasting preservation power
- EPA approved for use in coatings, paints, mineral slurries and most building materials formulations
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Home Care Applications
- Industrial Additives End Use
- Application Information
Use Bioban™ BTCM for the control of bacteria and fungi in paints and coatings, latex emulsions, adhesives and tackifiers, and building materials as well as other formulations. Refer to label for the complete list of approved uses. The table below lists the end-use applications for Bioban™ BTCM Antimicrobial in the United States. It is recommended that Bioban™ BTCM Antimicrobial is tested in the specific formulation in order to determine the best performing and cost-effective dosage level. Consult the product label for updated uses, dosages and for the approved uses in the state of California.
- Application Information
Application Dose/Use Rates % (w/w) Paints and Coatings 0.15% - 0.45% Latex Emulsions 0.15% - 0.45% Process Wash Solutions 0.15% - 0.45% Adhesives and Tackifiers 0.15% - 0.45% Building Materials 0.15% - 0.45% Aqueous Mineral Slurries and Pigment Dispersions 0.15% - 0.45% Inks and Fountain Solutions 0.15% - 0.45% Silicone Emulsions 0.12% - 0.40%
Properties
- Physical Form
- Physical Properties
Value Units Test Method / Conditions pH Value (as Supplied) 03 - 07 - - Specific Gravity (Water = 1) 0.98 - 1.08 g/ml - - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Appearance Flowable dispersion, gray to slightly beige - - Boiling Point (at 760 mmHg) 100 °C - Color Off - white - - Dynamic Viscosity 64.75 mPa.s - Flash Point min. 100 °C - Insoluble in Water - - Liquid Density 1.018 g/cc - Odor Faint - - pH Value 4.3 - - Physical State Flowable dispersion - - Relative Density (Water = 1) 1.08 - - - Composition
Value Units Test Method / Conditions BIT (1,2 benzoisothiazolin-3-one) 09 - 11 % - CMIT/MIT (Chloro-2-methyl-4-isothiazolin-3-one 2-methyl-4-isothiazolin-3-one) 0.38 - 0.64 % -
Storage & Handling
- Storage And Handling Information
Handling Precautions
Before using this product, consult the Material Safety Data Sheet (MSDS)/Safety Data Sheet (SDS) for details on product hazards and recommended handling precautions. The processing and use of industrial chemicals require adequate technical and professional knowledge. In general, avoid eye and skin contact, wear safety goggles, gloves and protective clothing. In case of eye or skin contact despite precautionary measures, wash immediately and thoroughly with plenty of warm water and obtain medical attention. The legal requirements prevailing in your country, especially on occupational safety and in the avoidance of accidents, must be observed.
Storage
Before using this product, consult the Material Safety Data Sheet (MSDS)/Safety Data Sheet (SDS) for details on product hazards and recommended product storage. For optimal shelf life, store between 20°C and 25°C (68°F and 77°F). Storage temperatures: 10°C (50°F) to 40°C (104°F). Keep from freezing. BIOBANᵀᴹ BTCM Antimicrobial should be stored in original sealed containers in a shaded area. After prolonged storage, mix in sealed container prior to use.