Bionix® BP25

• Broad spectrum bacterial efficacy
• Controls Pseudomonas sp.
• Controls slime forming bacteria
• Controls anaerobic bacteria responsible for microbial induced corrosion
• Very effective in combination with other biocides.

Bionix® BP25 can be dosed directly either by open pouring or by metered pump, for cooling water applications open pouring is not permitted. The concentration required to give protection depends on several factors. These include the susceptibility of the system to microbiological degradation, the extent to which microorganisms can gain access, the species involved, pH, temperature and length of time for which protection is required. Bionix® BP25 can be used alone or in combination with other compatible biocides. The use of multiple preservatives provides additional protection against bacterial and fungal spoilage. The most popular combinations are those with 5-Chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-4-isothiazolin- 3-one (CMIT/MIT). Bionix® BP25 is best added after any heating stage or when the product has cooled below 40°C.

Water Treatment
• Industrial recirculating water cooling towers and evaporative condensers, industrial and/or commercial air washer and/or humidfying systems/paint spray booths, industrial process water.

Pulp and Papermills
• Papermill process water, paper mill’s bulk pulp, slime control.

General Perspective
• Adhesives, metalworking fluids, building materials, absorbent clays, corn cobs and ground wood, starch, pigment and mineral and extender slurries, latices, polymer emulsions or solutions, liquid household and institutional products, semi-solid/solid household and institutional products, surfactants and raw materials used in consumer, household and institutional products, water based agricultural pesticide concentrates, water based printing inks and fountain solutions, paints, latex and other emulsion systems, hides and skins and leather.

Oil/Gas Production
• Oil and gas fluids, drilling muds, drilling fluies and workover and completion fluids, oil flooding waters/injection waters, injection fluids, enhanced oil recovery fluids, well squeeze fluids, fracturing fluids, produced water, pipeline and tank maintenance, water bottoms in oil or transportation tanks.

• Keep container tightly closed in a dry and well-ventilated place. Avoid extreme temperatures. Do not expose todirect sunlight or ultraviolet light. Avoid sulfur containing rubber.
• Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuatepersonnel to safe areas. Wear respiratory protection.