Enhanced TDS
Identification & Functionality
- Chemical Family
- Manufactured By
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Cure Method
- Adhesive & Sealant End Applications
- Coating End Applications
- Use Level
- 0.1 - 0.3% (Additive Coatings Industry), 0.1 - 0.5% (Additive Adhesives and Sealants), 0.3 - 1% (Additive Overprint Varnishes), 100% (UV Adhesives and Sealants), 100% (UV Over Print Varnishes)
- Application Information
Coatings Industry
Special Features and Benefits
BYK-UV 3535 improves the leveling of radiation curable systems. The product is very compatible and causes no haze in the coating system. In many cases it displays a deaerating effect. Even at a low dosage it leads to an increase in surface tension. Associated with this are increased surface energy, improved recoatability and intercoat adhesion, even of aqueous systems. In addition, BYK-UV 3535 produces an anti-slip effect. The additive is UV-reactive and displays crosslinking with radiation curable systems. For this reason its effect is long lasting and it does not migrate. BYK-UV 3535 is suitable for solvent-free, solvent-borne, and aqueous, radiation curable systems.Recommended Levels
0.1-0.3% additive (as supplied) based upon total formulation, in exceptional cases up to 0.5%.
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.Incorporation and Processing Instructions
The additive can be incorporated during any stage of the production process, including post-addition.Special Note
The additive is functional and is crosslinked into radiation curable systems.Coatings Industry
Special Features and Benefits
BYK-UV 3535 improves the leveling of radiation curable systems. The product is very compatible and causes no haze in the coating system. In many cases it displays a deaerating effect. Even at a low dosage it leads to an increase in surface tension. Associated with this are increased surface energy, improved recoatability and intercoat adhesion, even of aqueous systems. In addition, BYK-UV 3535 produces an anti-slip effect. The additive is UV-reactive and displays crosslinking with radiation curable systems. For this reason its effect is long lasting and it does not migrate. BYK-UV 3535 is suitable for solvent-free, solvent-borne, and aqueous, radiation curable systems.Recommended Levels
0.1-0.3% additive (as supplied) based upon total formulation, in exceptional cases up to 0.5%.
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.Incorporation and Processing Instructions
The additive can be incorporated during any stage of the production process, including post-addition.
Special Note
The additive is functional and is crosslinked into radiation curable systems.Overprint Varnishes
Special Features and Benefits
BYK-UV 3535 improves the leveling of 100%, UV-curing overprint varnishes. The additive displays an anti-slip effect and does not stabilize foam. The good compatibility with standard binders enables highly transparent overprint varnishes to be produced.
Recommended Use
Recommended for 100% UV overprint varnishes.
Recommended Levels
0.3-1% additive (as supplied) based upon total formation.
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
Incorporation and Processing Instructions
The additive can be incorporated during any stage of the production process, including post-addition.
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Density (at 20°C) 1.11 g/ml - Refractive Index 1.476 - - Active Substance 100 % - Hydroxyl Group Value 250 mg KOH/g - - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Auto Ignition Tempertaure min. 200 °C M0062, Analytics Wesel Flash Point min. 100 °C Pensky-Martens Initial Boiling Point min. 250.5 °C Derived Melting Point max. 0 °C Density (at 20°C, 1013 hPa) 1.105 g/cm³ Oscillating U-tube Vapour Pressure (at 20°C) max. 1 hPa Derived Appearance Liquid - - Color Light yellow - - Flammability (liquids) Sustains Combustion - - Miscible in Water - - Odor Acrylic-like - - pH (at 20°C, Concentration: 1%) 7 - Universal pH-Value Indicator - Composition Data
Modified, silicone-free polyether
Regulatory & Compliance
- OEM Specifications
Storage & Handling
- Storage Conditions
Do not store or transport above 40 °C. Protect the additive from direct sunlight.