Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Manufactured By
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Application Area
- Coating End Applications
- Use Level
- 1 - 5% (Coil Coatings), 3 - 13% (Architectural Coatings)
- Application Information
Coatings Industry
Special Features and Benefits
The additive increases surface slip and also improves the scratch resistance, it displays good anti-blocking properties and has a hydrophobic effect. It is recommended for solvent-borne coil coatings and architectural coatings.
Recommended Levels
1-5% additive (as supplied) based on the total formulation in coil coatings.
3-13% additive (as supplied) based on the total formulation in architectural coatings.
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
Incorporation and Processing Instructions
The additive should preferably be post-added to the coating using a low shear rate. Mix well before use.
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Particle Size Distribution (D50) 3 μm Laser Diffraction Analyzer, Volume Distribution Particle Size Distribution (D90) 7 μm Laser Diffraction Analyzer, Volume Distribution Non Volatile Matter 15 % - Viscosity (at 23°C, D=200/s) 60 mPa.s - Melting Point (Wax component) 120 °C - - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Lower Explosion Limit 6 %V Upper Explosion Limit 10 %V Flash Point 62 °C Pensky-Martens Closed Cup Initial Boiling Point 140 °C - Kinematic Viscosity (at 40°C) min. 20.5 mm²/s - Dynamic Viscosity 60 mPa.s - Appearance Dispersion - - Color Yellow - - Flammability (liquids) Sustains Combustion - - Immiscible In Water - - pH Insoluble - - - Resin Properties - Filled Casting (Cured)
Value Units Test Method / Conditions Density (at 20°C, 1013 hPa) 0.9 g/cm³ - - Composition
Fischer Tropsch wax dispersion
Regulatory & Compliance
- OEM Specifications
Storage & Handling
- Storage Conditions
Temperature sensitive. To be stored and transported at a temperature below 35 °C. Mix well before use.