Enhanced TDS
Identification & Functionality
- Chemical Family
- Manufactured By
- Reinforcement Form
- Reinforcement Material
- Composite Materials Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- User Benefits
- Suitable for a wide range of polyamide thermoplastic resin systems: PA6, PA66, PA46, PA610, and PA612.
- Low viscosity during compounding supports high throughput processes.
- Provides uniform dispersion during the compounding operation.
- Excellent design-in-forming capabilities in injection molding machines.
- High impact properties and fatigue resistance.
- High hydrolysis resistance properties in several long life coolant (LLC) systems.
- Excellent mechanical properties in combination with environmentally-friendly flame retardants.
- U.S. Food and Drug Administration and EU 10/2011 compliance for repeated-use food contact applications.
- French and German potable water contact compliance.
- Product supported by NEG’s extensive technical resources.
- Other packaging, including smaller quantities of product, available upon request.
- Manufacturing facilities operate quality management systems that comply with ISO 9001:2015 requirements.
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers Processing Methods
Properties
- Chemical Resistance
- Physical Form
- Mechanical Properties
Value Units Test Method / Conditions Charpy (unnotched,PA66/PA66(after hydrolysis ), 10 days in boiling mixture (93/7) of long life coolant (LLC) and water (135°C)) 85/72 kJ/m² ISO 179 Glass Content by Weight (PA66/PA66(after hydrolysis ), 10 days in boiling mixture (93/7) of long life coolant (LLC) and water (135°C) 30 % ISO 179 Tensile Elongation (PA66/PA66(after hydrolysis ), 10 days in boiling mixture (93/7) of long life coolant (LLC) and water (135°C) 3.75/4.25 % ISO 527 Tensile Modulus (PA66/PA66(after hydrolysis ), 10 days in boiling mixture (93/7) of long life coolant (LLC) and water (135°C) 10.3/4.9 GPa ISO 527 Tensile Strength (PA66/PA66(after hydrolysis ), 10 days in boiling mixture (93/7) of long life coolant (LLC) and water (135°C) 200/95 MPa ISO 527 - Typical Properties
Value Units Test Method / Conditions Average Fiber Diameter 10 µm - Standard Cut Length 3.2 mm - Standard Cut Length 4.5 mm - Standard Cut Length 3.8 mm - Type of Fiber E-Glass - ASTM D 578-05, Section 4.2.2 Type of Sizing Silane - -
Safety & Health
- Caution
To avoid the possibility of potential injury, maintain column stability by limiting pallet stacking to two (2) high as noted on individual shipping containers.
Packaging & Availability
- Packaging Type
- Packaging Information
- America
- 1,000 kg Bulk Bag
- 612 kg (1,350 lb.) Corrugated Carton
- Europe
- 1,000 kg or 1,100 kg Bulk Bag
- 1,100 kg Octabin
- America
Storage & Handling
- Shelf Life
- 2 year
- Storage Information
- These products should be stored in a dry area with ambient temperature and relative humidity, optimally from 20°C to 25°C and between 50% and 70%, respectively.
- Protect product from all sources of water at all times.
- A First-In-First-Out (FIFO) stock control system is recommended to minimize the influence of storage conditions.
- Prior to use, products should be conditioned in the work area for a minimum of 24 hours.
- If contents of a package unit are partially used, the unit should be closed until the next use.
- With proper storage, there are no known limitations on the shelf life of the product.
- To insure optimal performance, retesting is recommended for products stored more than two years from the initial production date.