Enhanced TDS
Identification & Functionality
- Manufactured By
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Coating End Applications
- Use Level
- 10 - 20% (Transparent Iron Oxide Pigments), 10 - 30% (Organic Pigments), 5 - 15% (Inorganic Pigments)
- Application Information
Coatings Industry
Special Features and Benefits
The additive deflocculates pigments by means of steric stabilization. As a result of the small particle size of the deflocculated pigments, high levels of gloss can be achieved and the color strength is improved. Transparency and hiding power also increase and viscosity is reduced. In this way, the flow characteristics are also improved and a higher pigment load is possible. DISPERBYK-106 is odorless and solvent-free.
Recommended Use
The additive is particularly recommended for architectural coatings, industrial coatings, wood and furniture coatings as well as to stabilize pigment pastes. It can be universally used with binders of differing polarities (e.g. aromatic-free alkyd resins and aldehyde resins).
Recommended Levels
Amount of additive (as supplied) based on the pigment:
Inorganic pigments 5-15 %
Organic pigments 10-30 %
Transparent iron oxide pigments 10-20 %
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
Incorporation and Processing Instructions
For optimum performance, the additive must be incorporated into the millbase before addition of pigments.
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Density (at 20°C) 0.98 g/ml - Amine Value 74 mg KOH/g - Acid Value 132 mg KOH/g - - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Auto Ignition Tempertaure min. 200 °C DIN 51794 Flash Point 123 °C Pensky-Martens Initial Boiling Point min. 200 °C Estimated Melting Point max. 0 °C Estimated Density (at 20°C) 0.98 g/cm³ Oscillating U-tube Vapour Pressure (at 20°C) max. 1 hPa Calculated Appearance Liquid - - Color Amber - - Flammability (liquids) Sustains Combustion - - Immiscible In Water - - pH (at 20°C, Concentration: 1%) 6 - Universal pH-Value Indicator - Note
When stored at higher temperatures, the acid value can change but the effectiveness is not impaired.
- Composition
Alkylammoniumsalt of a polymeric phosphoric acid ester
Regulatory & Compliance
- OEM Specifications