Enhanced TDS
Identification & Functionality
- Carrier
- Manufactured By
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Coating End Applications
- Use Level
- 3 - 6% (Titanium Dioxides), 10 - 27% (Inorganic Pigments), 3 - 6% (Fillers and Anti-Corrosive Pigment)
- Application Information
Coatings Industry
Special Features and Benefits
DISPERBYK® 2080 uses electrosteric stabilization to deflocculate the pigments. The deflocculating property of the additive results in increased gloss and a reduced millbase viscosity. As a result of its hydrophobic nature, the additive minimizes water absorption in the entire coating system, which has a positive effect on the corrosion and stain resistance. DISPERBYK® 2080 is particularly suitable for use in aqueous anti-corrosive primers and direct-to-metal systems in which it positively influences the wet and dry adhesion. It is also recommended for aqueous wood and furniture coatings.Recommended Levels
Amount of additive (as supplied) based upon pigment:
Fillers and anti-corrosive pigments: 3-6%
Inorganic pigments: 10-27%
Titanium dioxides: 3-6%
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
Incorporation and Processing Instructions
For optimum performance, the additive must be incorporated into the millbase before the addition of pigments. Simply pre-mix the water and additive. In all cases, only add the pigments when the additive has been thoroughly distributed.
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Density (at 20°C) 1.04 g/ml - Active Substance 30 % - Solvent Water - - - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point 100 °C Estimated Melting Point max. 5 °C Estimated Density (at 20°C, 1013 hPa) 1.041 g/cm³ Oscillating U-tube Vapour Pressure (at 20°C) 24 hPa Estimated Appearance Liquid - - Color Yellow - - Flammability (liquids) Does not sustain combustion - - Odor Characteristic - - pH (at 20°C, Concentration: 100%) 9.0 Universal pH-Value Indicator Soluble in Water - - - Composition
Solution of modified styrene maleic acid copolymer
Regulatory & Compliance
- OEM Specifications
Storage & Handling
- Storage Conditions
To be stored and transported between 5 °C and 40 °C.