Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Manufactured By
- Industrial Additives Functions
- Technologies
- Product Families
Features & Benefits
- Industrial Additives Features
- Key Features
- DISPERPLAST® 1148 reduces the viscosity of pigmented and filled PVC plastisols.
- It is particularly recommended for inorganic fillers, zinc oxide and blowing agents (azodicarbonamide).
- The product enables a greater solids content, improves the color strength of the pigments and shortens the dispersion time.
- It also prevents any separation of the plasticizer.
- The tendency to settle is reduced.
Applications & Uses
- Industrial Additives End Use
- Use Level
- 1 - 3% (Zinc oxide), 1 - 2% (Blowing agent), 1 - 3% (Inorganic fillers), 1 - 3% (Inorganic pigments)
- Processing Instructions
- The additive should be added to the liquid components prior to incorporating the solids.
- DISPERPLAST® 1148 can be used in either a liquid, solid or partially solid form.
- The product efficiency is not influenced if it is carefully dispersed in the plasticizer.
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Flash Point 185 °C - Refractive Index (at 20°C) 1.462 - - Density (at 20°C) 0.96 g/ml - Acid Value 70 mg KOH/g - - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Ignition Temperature min. 392 °F Method: DIN 51794 Immiscible In Water - - Density (at 68°F) 0.961 g/cc 4 (Oscillating U-tube, at 20°C) Flash Point 185 °C 49 (Pensky-Martens) Vapor Pressure (at 20°C) max. 1.0000000 hPa Calculated Initial Boiling Point min. 280 °F - Melting Point max. 41 °F - pH Value (at 20°C, 1% Concentration) 4 - - Odor Not significant - - Appearance Colorless to light yellow liquid - - Kinematic Viscosity (at 40°C) 52 mm²/s -
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Storage Information
The product can solidify below 20 °C. Warm to 30-60 °C and mix well. Moisture sensitive. Store dry.