Enhanced TDS
Identification & Functionality
- Chemical Family
- Manufactured By
- Fluids & Lubricants Functions
- Technologies
- Product Families
Features & Benefits
- Fluids & Lubricants Features
Applications & Uses
- Markets
- Applications
- Fluids & Lubricants Type
- Fluids & Lubricants End Use
- Application Information
- Functional MB-1010 is a liquid-form polyalkylmethacrylate viscosity modifier that offers high thickening efficiency with excellent shear stability.
- Functional MB-1010 has been specifically formulated to provide additional VI improvement, demulsibility, and pour point depressancy. The high shear stability also makes Functional MB-1010 attractive in gear oil formulations.
- Use Functional MG-3000 for multi-grade gear oils intended for low temperature operation.
- For a complete hydraulic fluid formulation, use Functional MB-1010 with Functional HF-580. To complete a gear oil formulation, consider Functional GA-602 (open gear) or Functional GA-604 (closed gear).
Properties
- Physical Form
- Insoluble in
- Water
- Typical Properties
Value Units Test Method / Conditions Lbs per Gallon 7.8 - ASTM D 1475 Specific Gravity 0.93 - - Kinematic Viscosity (at 100°C) 900 °C ASTM D445 Thickening Efficiency (at 100°C, 10%) 8.6 cSt ISO 32 PSSI (5% in 150N) 0 - 1 % ASTM D 6278 KRL (20 hours) 15 % - Flash Point min. 150 °C ASTM D 92 Color max. 1.0 - ASTM D 1500 - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Auto Ignition Temperature min. 200 °C -
Regulatory & Compliance
Technical Details & Test Data
- Treatment Level
- Typical treatment level for methacrylate-based viscosity modifiers ranges from 5 to 10% for hydraulic fluids and 5% to 20% for gear oils.
- 10 wt% Functional MB-1010 will increase an ISO 32 oil to ISO 46.
Functional MB-1010 Treat Level vs. Viscosity at 100˚C
wt% Treat 100N Oil (ISO 22) 150N Oil (ISO 32) 200N Oil (ISO 46) 350N Oil (ISO 68
0% 3.9 5.4 6.5 8.3 10% 6.5 8.4 9.9 12.7 Suggested* Treat Levels for Functional MB-1010:
- Hydraulic Fluids:
To obtain specific viscosity grades from a 100N (ISO 22) base oil:
Base Oil Treat Level (wt%) 40˚C Viscosity 100˚C Viscosity VI 100N (ISO 22) 0.0% 19.4 cSt 32.2 cSt 92 150N (ISO 32) 9.90% 32.2 cSt 6.5 cSt 161 To obtain specific viscosity grades from a 150N (ISO 32) base oil:
Base Oil Treat Level (wt%) 40˚C Viscosity 100˚C Viscosity VI 150N (ISO 32) 0.0% 30.6 cSt 5.4 cSt 117 200N (ISO 46) 9.90% 47.7 cSt 8.4 cSt 153 - Gear Oils:
Base Oil Desired ISO VG (40˚C) Desired SAE Gear (100˚C) Treat Level (wt%) ISO 150 SN (SAE 85) 220 SAE 90 7 – 12% 200N (ISO 46) SAE 110 12 – 15% 320 SAE 140 15 – 21 460 25 – 30% SAE 190 4 – 9% ISO 460 BS (SAE 140) 680 11 – 16% SAE 250 15 – 20% 1000 24 – 29%
Storage & Handling
- Storage and Handling Information
- Functional MB-1010 should be warmed to about 50°C (120°F) to facilitate pumping and handling.
- The base oil should be heated to 60-80˚C (140-180˚F) during blending to allow for good mixing
- Mixing time will vary with equipment but is typically at least one hour