Enhanced TDS
Identification & Functionality
- Manufactured By
- Fluids & Lubricants Functions
- Technologies
- Product Families
Features & Benefits
- Fluids & Lubricants Features
Applications & Uses
- Compatible Base Stocks
- Application Information
- Functional V-705 is a pure liquid viscosity modifier with high thickening efficiency and low temperature fluidity for high performance at lower cost per treat.
- The exceptional shear stability of Functional V-705 allows it to act as a high viscosity synthetic base stock
Properties
- Physical Form
- Appearance
- Liquid clear colorless
- Odor
- Mild
- Insoluble in
- Water
- Typical Properties
Value Units Test Method / Conditions Kinematic Viscosity (at 100°C) 6500 cSt ASTM D445 Kinematic Viscosity (at 40°C) 37000 cSt ASTM D445 Viscosity Index (at - 25°C) 516 mPa.s - Density 7.5 lb/gal - Specific Gravity 0.9 - - Flash Point min. 220 °C ASTM D 92, COC Pour Point -24 °C ASTM D97 Thickening Efficiency (at 100°C, 10wt%) 20.3 cSt ISO 32 Gr. II Thickening Efficiency (at 100°C, 10wt%) 26.4 cSt Canola Shear Stability Index (10wt% in PAO4) 0 SSI ASTM D 6278, PSSI KRL Shear Stability (10 wt% in Canola, 20 hour) 3.9 % CEC L-45-A-99 - Notice
- Functional V-705 is intended for lubricants operating within temperature ranges from “average” (70-100°C / 158-212°F) to “very low” (<-34°C/-29°F) as defined in ISO 6743-6 guidelines.
- Functional V-705 is not recommended for use in lubricants or greases operating in continuous service >120°C/248°F ("very high"). This includes engine or crankcase oils, automatic transmission fluids, clutch fluids, and other lubricants under severe thermal loads.
- Very high temperature testing (methods like CEC L-60 and CEC L-37) may produce inadequate results in viscosity change and precipitation number. Testing at intermediate temperatures of 120-135°C (250-275°F), in ASTM D2893 and D2070 for example, is best when limiting total sulfur in the formulation to < 1.0wt% for 121°C and ideally < 0.50wt% for 135°C. Inactive sulfur packages are recommended where possible.
Regulatory & Compliance
Technical Details & Test Data
- Treatment Level
- Functional V-705 is compatible in petroleum oils (Group I-III and naphthenic), PAO, vegetable oils, polyol esters, diesters, and estolides. Functional V-705 is compatible in low viscosity oil soluble (OS) PAG fluids but not WS or WI grades.
- Treatment levels of 2 - 20% are typical in industrial lubricants and greases.
- Functional V-705 can be used as either a VI improver or a shear stable base stock depending on the need. See next page for starting formulas. Functional V-705 is not suggested for very high temperature service. See next page for more information.
Storage & Handling
- Storage and Handling Information
- Dissolving is best accomplished with continuous agitation at temperatures of 104-140°F (40-60°C). Functional V-705 may be preheated in a hot room or tank at up to 176°F (80°C) to aid in pumping but long term storage should remain below 140°F (60°C).
- Functional V-705 is a non-hazardous material;