Enhanced TDS
Identification & Functionality
- Chemical Family
- Manufactured By
- Plastics & Elastomers Functions
- Technologies
- Product Families
Applications & Uses
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Use Level
- 0.5 - 1.5 phr
- Properties and Applications
Loxiol® P 728 is suitable as an internal lubricant for rigid PVC, such as films and bottles and injection molded articles. Loxiol® P 728 shows a synergistic effect when used with CaZn stabilizers. It facilitates mold filling and mold release in injection molding. Additives such as pigments and fillers are best dispersed in the polymer melt.
Properties
- Physical Form
- Odor
- Practically odorless
- Appearance
- Slight yellowish, delivery form as powder
- SDS Physical and Chemical Properties
Value Units Test Method / Conditions Dynamic Viscosity 29 - 40 mPa.s - Density (at 80°C) 0.898 - 0.91 g/cc - Flash Point min. 270 °C ISO 2592, Open cup Melting Point 48 - 52 °C - Odor Characteristic. [Slight] - - Appearance White to yellowish solid - - - Specifications
Value Units Test Method / Conditions Saponification Value 174 - 184 mg KOH/g DIN EN ISO 3681 Water Content max. 0.3 % DIN 51777 Color (1" red) 0 - 2.0 - Lovibond, DGF C-IV 4b Color (1" yellow) 0 - 4.0 - Lovibond, DGF C-IV 4b Hydroxyl Value 145 - 158 mg KOH/g DIN 53240 Acid Value 0 - 1.0 mg KOH/g DIN EN ISO 2114 Drop Point 49 - 52 °C DIN ISO 2176 - Note
*Values remain within indicated bandwidth, but will not be measured with every batch.
Regulatory & Compliance
- Certifications
Loxiol® P 728 is registered in compliance with the EU REACH regulation. Loxiol® P 728 complies with indirect food contact directives.
Packaging & Availability
- Packaging Information
- Bags, 25 kg
- Big bags, 900 kg
Storage & Handling
- Shelf Life
- min. 24 months
- Storage and Handling Information
It is recommended to store Loxiol® P 728 at room temperature and to protect the product against the effects of heat and frost. If stored in original sealed packaging, Loxiol® P 728 should be stable for at least 24 months from the date of manufacture.