Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Manufactured By
- CASE Ingredients Functions
- Industrial Additives Functions
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Industrial Additives End Use
- Use Level
- 0.01 - 0.1% (Interior Paints)², 0.01 - 0.1% (Sealants)²,³, 0.02 - 0.1% (Paper Products)²,³, 0.05 - 0.15% (Adhesives)²,³, 0.05 - 0.4% (Exterior Paints)², 0.05 - 0.5% (Natural and Synthetic Fibers (Textiles, Fabrics, Canvas and Cordage (Not for Apparel)))²,³, 0.05 - 0.8% (Grouts)²,³, 0.1 - 0.3% (Plastics (Vinyl chloride or Urethane))², 0.1 - 0.5% (Air Filters (heating & Cooling filters) and/or room air cleaner/purifiers))²,³, 0.2 - 0.3% (Plastics (Polypropylene, Polyethylene, or Nylon))², max. 25% (treated plastic intermediate)²,³
- Application information
- Metasol® TK-100 is off-white to tan powder of thiabendazole.
- Metasol® TK-100 has low volatility and is both pH and temperature stable. Metasol® TK-100 also has a low water solubility and a good fungicidal efficacy. When combined with another fungicide active, Metasol® TK- 100 provides long term dry-film protection.
- Metasol® TK-100 will not adversely affect product physical properties or performance and should not impart odor or color to most final products.
- The appropriate dose of Metasol® TK-100 depends on several factors: raw materials, microbial load, pH, estimated storage time. Good manufacturing practices can help optimizes the Metasol® TK-100 effectiveness.
- To obtain reliable and reproducible results, homogeneous distribution in the materials to be protected must be ensured by taking suitable measures in production (stirring, agitating, etc.).
- As with any product, the use of this product must be tested (including field testing) prior to incorporating into finished product.
Properties
- Color (Properties)
- Physical Form
- Appearance
- Off white to tan powder
- SDS Physical and Chemical Properties
Value Units Test Method / Conditions Appearance Powder - - Appearance Off-white tan solid powder - - Partition Coefficient (N - octanol/water) 2.39 - - Insoluble in Cold water - - Specific Gravity 1.4 - - Melting Point 298 - 301 °C - pH Value (at 4% w/w Concentration) 5 - 6 - - Odor Odorless - - pH Value (at 4% concentration) 5 - 6 - - Vapor Pressure (at 25°C) max. 0.0001 hPa - Density (at 20°C) 1.4 g/cm³ - Water Solubility (at 25°C) 0.031 g/L - Autoignition Temperature 450 °C - - Composition
Value Units Test Method / Conditions 2-4-Thiazolyl)benzimidazole Content approx. 99.5 % - - Characteristics
Value Units Test Method / Conditions Melting Point* 298 - 301 °C - Vapor Pressure* max. 0.0001 hPa - Water Solubility* 0.031 g/L - - Note
- *- These items are provided as general information only. They are approximate values and are not considered to be part of the product specifications.
- 2- For detailed dosage instructions see Metasol® TK-100 EPA Label
- 3- Not For Use in the State of California
- Material Compatibility
- Metasol® TK-100 is compatible with PVC, polyethylene, polypropylene, 304 and 316 stainless steel, and kynar.
- As with any product, use of the products mentioned in this publication in a given application must be tested (including field testing, etc.) by the user in advance to determine suitability.
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Precautions
Metaso® TK-100 is supplied as a powder. When handling Metasol® TK-100, general recommendations for handling any chemicals should be observed, e.g. wearing of protective clothing, safety goggles and protective gloves. Skin contact and inhalation of vapors should be avoided. If the product comes into contact with the body, the affected area should be washed immediately with large amounts of soap and vater (e.g. product that has been splashed in the eyes should be rinsed out immediately with plenty of water). should be removed and property cleaned or disposed. If irritation persists, the affected individual should obtain medical attention. Contaminated clothing should be removed and property cleaned or disposed.
Storage & Handling
- Shelf Life
- 60 months
- Storage Conditions
- Product should be stored in the original sealed package.
- If stored properly, Metasol® TK-100 has a shelf life of at least 60 months.