Enhanced TDS
Identification & Functionality
- Chemical Family
- Manufactured By
- CASE Ingredients Functions
- Industrial Additives Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Industrial Additives Features
- Product Highlights
- Broad spectrum activity: controls a wide range of bacteria and fungi
- Fast acting: reduces production down time and delays due to contamination
- Two different modes of biocidal activity: added protection against tough microbes found in manufacturing environments
- Liquid formulation: ease of handling and incorporation
- VOC-Free formulation: does not contribute to VOC content in final formulation
- Please note that not all products are registered in all regions for all applications.
Applications & Uses
- Markets
- Applications
- Industrial Additives End Use
- Ink & Toner End Applications
- Application information
Rocima™ 586 microbicide is an effective preservative in most aqueous compositions. The concentration required to give protection depends on several factors. These include the susceptibility of the system to microbiological degradation, the extent to which microorganisms can gain access, the species involved, pH, temperature and length of time for which protection is required. Trials at different concentrations are recommended. Suggested use levels of Rocima™ 586 microbicide are shown below.
Key (Type of Material to be Preserved)
Value (Lbs of Rocima™ 586 Microbicide to use per 1,000 lb of Material to be Protected)
Adhesives and Tackifiers 0.5 to 2.25 lb (0.05 to 0.225%)
Aqueous Slurries of Pigments 0.5 to 2.25 lb (0.05 to 0.225%)
Building Materials 0.5 to 2.25 lb (0.05 to 0.225%)
Fountain Solutions 0.5 to 2.25 lb (0.05 to 0.225%)
Industrial Cooling Water and Air Washers See label for initial dose and subsequent dose levels
Industrial Water 0.5 to 2.25 lb (0.05 to 0.225%)
Paint and Coatings 0.5 to 2.25 lb (0.05 to 0.225%)
Polymer Latices 0.5 to 4.5 lb (0.05 to 0.45%)
Printing Inks 0.5 to 2.25 lb (0.05 to 0.225%)
Properties
- Physical Form
- Soluble In
- Appearance
- Colorless to light yellow liquid
- Soluble in
- Water
- Physical Properties
Value Units Test Method / Conditions pH Value 4 - - - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Percent Volatile 89 - 90 % - Relative Density (water = 1) 1.08 - - Flash Point min. 100 °C - Insoluble in Water - - Boiling Point 100 °C Derived pH Value 4.3 - - Color Light Yellow
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Storage & Handling
- Storage Conditions
In general, avoid eye and skin contact, wear safety goggles, gloves and protective clothing. In case of eye or skin contact, despite precautionary measures, wash immediately and thoroughly with plenty of warm water and obtain medical attention. ROCIMATM 586 microbicide should be stored at room temperature in tightly sealed original containers. Protect from frost and heat. Any supplies which do freeze must be mixed thoroughly after thawing before they can be used without any loss in efficacy. ROCIMATM 586 microbicide is stable up to 40°C.