Products

Filtrez™ 530 is a rosins ester-based product in flake form. It complies with multiple regulatory requirements, including OSHA 29 CFR 1910.1200, the Clean Air Act (CAA) Section 112, California Proposition 65, CERCLA, and SARA 311/312. It is listed in the TSCA (USA) chemical inventory.

Snowtack™ SE780G Water-Borne Tackifier is a 55% solids, solvent-free tackifier dispersion based on rosin adduction and esterification. It contains a high-grade stabilized rosin ester designed for superior adhesive performance across various substrates. With fine particle size and narrow distribution, it is APE-free and stabilized with a polymeric system. Snowtack™ SE780G must be protected from freezing, and care should be taken to prevent foam formation during handling.

Setaprint™ 999 A is a low-viscosity phenolic-modified rosin ester in flake form, offering high solubility in aliphatic solvents. It provides excellent pigment wetting properties and enables low solution viscosity in high-solids vehicles. This binder and resin is used in offset ink formulations and complies with TSCA (USA) and OSHA 29 CFR 1910.1200 standards.

Snowtack™ 880G Water-Borne Tackifier is a 57% solids, solvent-free tackifier dispersion. Its resin component is a blend of rosin ester and non-rosin resin, providing superior adhesive performance across various substrates. With fine particle size and narrow distribution, it is APE-free and stabilized with a polymeric system. Snowtack™ 880G must be protected from freezing, and care should be taken to prevent foam formation during handling.

Teckros® R98 is a stabilized gum rosin ester designed for hot melt, pressure-sensitive adhesives, and other applications where rosin ester performance and low, pleasant odor are essential. Unlike tall oil-derived rosin esters, it is free from significant sulfur content, ensuring minimal and pleasant odor.

Teckros® R40 is a stabilized semi-solid ester of gum rosin, ideal for assembly, pressure-sensitive, flooring adhesives, and other applications requiring enhanced adhesion and low-temperature performance. It offers low odor and is free from significant sulfur content.

Teckros® Q85 is a solvent-free rosin ester dispersion offering an excellent balance of adhesion and shear properties for aqueous adhesives. It is suitable for acrylic, SB, and natural latex pressure-sensitive adhesives, product assembly, and other applications. With low and uniform particle size distribution and APE-free surfactant technology, it ensures excellent mechanical stability.

Teckros® H80 is a glycerol ester of highly hydrogenated rosin, offering excellent oxidative and heat stability. The hydrogenation process enhances stabilization, compatibility, and adhesive performance, particularly with acrylics and SBC polymers. It is used as a binder, resin, and tackifier in pressure-sensitive adhesives and polymer coatings. Teckros® H80 is compatible with a range of polymers, including butyl rubber, natural rubber, chloroprene rubber, styrene butadiene rubber, styrene isoprene butadiene, ethylene vinyl acetate, and styrene isoprene styrene. The product complies with FDA 21 CFR 176.180, 175.125, 176.170, 175.105, and 175.300 regulations.

Teckros® H96 is a pentaerythritol ester of hydrogenated gum rosin, offering excellent oxidative and heat stability. Hydrogenation ensures a highly stabilized form of rosin with unique compatibility and adhesive performance, making it suitable for use with acrylic, SBC, and polyolefin polymers.

Teckros® R100 is a light-colored, stabilized pentaerythritol ester of gum rosin designed for hot melt, pressure-sensitive, and other adhesive applications. It offers excellent rosin ester performance and a pleasant low odor, free from significant sulfur content, unlike tall oil-derived rosin esters.

Teckros® HX is a highly hydrogenated rosin known for its excellent oxidative stability and UV resistance. The hydrogenation process stabilizes the rosin, offering unique compatibility and adhesive performance, including with acrylic and SBC polymers. Its high acid functionality enhances adhesion to difficult-to-bond substrates.

Teckros® Q27 is a low Tg, water-dispersible rosin ester designed for adhesives requiring improved adhesion to challenging substrates and enhanced cold-temperature properties while maintaining shear strength. It is suitable for acrylic, SB, and natural latex pressure-sensitive adhesives, product assembly, and other aqueous adhesive applications.

Teckros® RL10 is a stabilized liquid gum rosin ester designed for pressure-sensitive adhesives, flooring, assembly, and other applications requiring enhanced adhesion and low-temperature performance. Free from significant sulfur content, it features a low and pleasant odor, unlike tall oil-derived rosin esters.

Teckros® AF128 is a fumaric-modified rosin ester designed for alcohol-based flexographic and gravure "E" type printing inks. It has high acid functionality, ensuring solubility in amines and aqueous ammonia, making it suitable for waterborne flexographic and gravure inks. The product is compatible with modified rosins, polyketone, nitrocellulose, and shellac. It meets FDA 21 CFR 175.300 and FDA 21 CFR 175.105 certifications.