Products

Bermocoll® EBM8000 is a non-ionic, water-soluble cellulose ether with enhanced enzyme resistance, improving the consistency, stability, and water retention of water-based formulations.

OPTIGEL WH is a powder rheology modifier and thixotrope belonging to the phyllosilicates chemical family. It is compatible with cellulose, cellulosics, and polyurethanes (PU), making it suitable for applications in thrust reversers and heat shielding.

DISPERBYK® 185 is a solvent-free wetting and dispersing additive for solvent-borne and aqueous industrial coatings as well as architectural coatings. It is particularly suitable for glycol-free universal pastes.

Optigel WX is a rheology additive based on activated phyllosilicate, designed for aqueous systems and mineral pre-mix mortars to impart thixotropic flow behavior. It offers high sagging resistance, excellent adhesion properties, and anti-settling characteristics. Suitable for a wide range of applications, including wood coatings, flooring adhesives, acrylic sealants, kitchen cleaners, and waterborne coatings. It is hydrophilic, highly thixotropic, and provides excellent storage stability and electrolyte tolerance. Optigel WX is compatible with acrylates and works over a wide pH range. Available in powder form.

Hordamer PE 02 is a polyethylene primary dispersion used for formulating release agents in metal die casting. It enhances surface protection in aqueous care products, improves adhesion in dispersion adhesives, and serves as an anti-caking additive in thermoplastics and hot-melt adhesives. Additionally, it acts as a wetting and dispersing agent for thermoplastic color masterbatches.

Preventol® AM 63D is a water-dispersible dispersion used in masonry coatings, stains, joint cement, and stuccos. It is formaldehyde-free, solvent-free, and VOC-free. This product functions as an anti-microbial agent, fungicide, algaecide, biocide, and preservative, offering broad protection against microbial growth and algae.

Ceraflour® 960 is a micronized, modified amide wax that improves degassing of β-hydroxyalkylamide-based powder coatings. It enhances pigment wetting and leveling and provides a scar effect in UV powder coatings.

Omyacarb® FT-FL is a high-purity, very fine, wet ground natural calcium carbonate, primarily used as a filler and pigment in plastics and elastomers. It is also applied in cement manufacturing. This product is certified under ISO 9001, ISO 14001, ISO 45001, and complies with Clean Air Act (CAA), Clean Water Act (CWA) Section 307, and Section 311. It is a white powder with excellent compatibility with Polyvinyl Chloride (PVC). Additionally, Omyacarb® FT-FL features applications in industrial additives, where it serves both as a filler and pigment. The product is also recognized under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA).

Rocima™ BT 2S Microbicide is a microbiocide from the chemical mixtures and blends family, not listed under California Proposition 65. It is a 20% solution of 1,2-benzisothiazolin-3-one (BIT) in dipropylene glycol, specifically designed for industrial applications.

Omyacarb® UFT-FL is a high-purity, ultra-fine, wet ground natural calcium carbonate. It is used as a pigment and filler in rigid PVC, flexible PVC, and masterbatch applications. The product is white in color and available in powder form. It meets certifications such as ISO 9001, ISO 14001, ISO 45001, Clean Air Act (CAA), and Clean Water Act (CWA) Sections 307 and 311, as well as SARA 302, 304, and 313.

Omyacarb® 5-SY is a high-purity, fine, wet ground natural calcium carbonate. It is used as a pigment and filler in render, plaster, joint fillers, and flexible and rigid PVC applications, including piping. The product is white in color, available in powder form, and is sourced from the USA. It meets certifications such as ISO 9001, ISO 14001, ISO 45001, and FDA 21 CFR 174.5, 175.300, and 178.3297.

Omyacarb® 3 - FL is a high-purity, very fine, wet ground natural calcium carbonate. It is composed of Limestone and belongs to the Calcium and Calcium Compounds family. The product is white in color and is available in a suspension physical form. It serves as both a filler and a pigment in various industrial applications.

BYK-ES 80 is a conductivity additive for solvent-borne coating systems, designed to enhance electrical conductivity in electrostatically-sprayed applications. It provides viscosity stability, prevents discoloration, and functions as a conductive agent.

RHEOBYK-7420 ES is a hygroscopic product that should be stored dry. Minor cloudiness of the material that may occur during storage does not affect its rheological effectiveness. The specified storage stability upon dispatch applies when the product is handled correctly and stored in unopened original containers.

BYK-P 104 S is a controlled flocculating wetting and dispersing additive for solvent-borne, medium- to high-polarity coatings. It prevents flooding and floating of titanium dioxide in combination with colored pigments and contains silicone to enhance flooding and floating behavior.