Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Manufactured By
- Plastics & Elastomers Functions
- Technologies
- Product Families
Applications & Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Flexural Modulus (for 1/8 inch 3.2 mm pultruded profile) 25000 MPa ASTM D790 Flexural Strength (for 1/8 inch 3.2 mm pultruded profile) 760 MPa ASTM D790 Heat Distortion Temperature (for 1/8 inch 3.2 mm casting) 103 °C ASTM D648 Barcol Hardness (1/8 inch 3.2 mm casting) 40 - 44 - 934-1 gauge, ASTM D2583 Tensile Elongation (for 1/8 inch 3.2 mm casting) 2.7 % ASTM D638 Tensile Modulus (for 1/8 inch 3.2 mm casting) 3900 MPa ASTM D638 Tensile Strength (for 1/8 inch 3.2 mm casting) 75 MPa ASTM D638 Flexural Modulus (for 1/8 inch 3.2 mm casting) 4100 MPa ASTM D790 Flexural Strength (for 1/8 inch 3.2 mm casting) 132 MPa ASTM D790 Color max. 3 - Gardner Specific Gravity 1.11 - 1.15 - - Styrene Content 29.0 - 33.0 % - Non Volatile Content 67.0 - 71.0 % - Peak Exotherm 213 - 232 °C - Gel to Peak Time (at 88°C to Peak Exotherm) 0:45 - 1:30 min:sec - Gel Time (at 66-88°C) 3:00 - 5:00 min:sec - Viscosity (#3 spindle at 12 rpm, 77°F 25°C) 2,500 - 3,100 cPs - - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Color Various - - Physical State Liquid - - Volatile Organic Compounds 31 %(w/w) - Relative Density 1.11 - 1.15 - - Vapor Density (Air = 1) 3.6 - - Vapor Pressure (Room Temperature) 0.57 kPa - Explosion Limits (Upper) 6.1 - - Lower Explosion Limit 1.1 - - Evaporation Rate (Butyl Acetate = 1) max. 1 - - Flash Point 31.1 °C Closed cup Boiling Point 145.2 °C - Odor Threshold 0.1 ppm - Odor Characteristic, aromatic, sweetish - -