Products

Interplastics Corve8300 is a vinyl ester resin belonging to the epoxy vinyl ester and polyester chemical families, used as a binder and matrix material in composite materials and as a resin in plastics and elastomers. This non-promoted, corrosion-resistant resin is based on bisphenol A epichlorohydrin and is suitable for applications such as tank relining, pipe fabrication, and tank construction. Manufactured with FDA-approved ingredients (CFR Title 21, CFR 177.2420), it is safe for single or repeated use in food-contact articles as prescribed by regulations.

Interplastics COR72-AA-451PP is a promoted, thixotropic, rigid, corrosion-resistant unsaturated polyester resin specifically designed for manufacturing liner pipes using cured-in-place techniques. It is formulated for reinforced liners, such as Premier Pipe’s Tech Liner, offering excellent chemical resistance, corrosion protection, and the ability to maintain structural integrity under challenging conditions.

Interplastics Polymer Concrete Resin COR07-202-1185 is a polyester-based resin, with styrene as the carrier and N,N-dimethylaniline (DMA) as a key chemical component. It is a liquid resin primarily used in industrial applications within the plastics and elastomers sector. The product complies with multiple certifications, including SARA 304, SARA 313, SARA 302, and SARA 311/312, as well as the Clean Air Act (CAA) Section 112 and Clean Water Act (CWA) Sections 311 and 307. It is TSCA-listed and TSCA-exempt in the USA.

BYK-1797 is a silicone-containing, highly effective defoamer and air release agent for solvent-borne, high-solid, and solvent-free 100% UV printing inks, overprint varnishes, and PUR-based thermosets. It also serves as a process additive for thermoset resin systems and polishes, including Pickering emulsions.

R. J. Marshal ULTRA 100 is a product designed for end uses where contact with sensitive skin is expected, such as bath mats.

Ricon® 157 is a low molecular weight, liquid polybutadiene resin with moderately high vinyl functionality, offering good reactivity, exceptional hydrophobicity, and excellent processing characteristics. Its polymeric structure ensures compatibility with saturated and unsaturated elastomers. As a Type II coagent, it provides good crosslink densities without impacting the cure rate, making it ideal for extrusions and moldings requiring higher crosslink density and improved processing.

NAN YA NPEL-128 is a liquid resin made from bisphenol-A and epichlorohydrin. It is recognized as a standard form, with variations developed for specific applications. Cured NPEL-128 provides high-quality, high-purity properties, including maximum mechanical strength, good chemical resistance, and excellent heat resistance.

Interplastics Sil17DA-2618 Flexible Resin is a polyester-based flexible resin used in plastics and elastomers applications.

Interplastics Corve8182 is a low-viscosity resin with high reactivity and corrosion resistance, making it ideal for use in composite materials. It functions as a binder and matrix material and is particularly suitable for pultrusion processing methods. This resin is also used in plastics and elastomers for enhanced performance in various applications requiring high-quality resins and binders.

R. J. Marshal ULTRA RES-N-SAND 16 is designed for anti-slip industrial floors, suitable for heavy-duty vehicles like lift trucks.

Interplastics Pultrusion Resin COR31-220-434 is a polyester-based resin with styrene as the primary chemical component. It is a liquid resin used in industrial applications within the plastics and elastomers sector. The product complies with key regulatory standards, including the Clean Air Act (CAA) Section 112, Clean Water Act (CWA) Sections 311 and 307, and SARA 313 and SARA 311/312. It is TSCA-listed and TSCA-exempt in the USA.

Interplastics Clear Low Hap Gel Coat is a liquid resin used as a surface finish in industrial applications. It belongs to the polyester chemical family and is compliant with California Proposition 65, SARA 313, and SARA 311/312.

Interplastics DCPD Laminating Resin COR61-AA-345W is a polyester-based resin, containing styrene as the primary chemical component. It is a liquid resin used in industrial applications within the plastics and elastomers sector. The product complies with key regulations, including the Clean Air Act (CAA), Clean Water Act (CWA) Sections 311 and 307, and SARA 313, 311/312. It is TSCA-listed and TSCA-exempt in the USA.

Pulse™ 2100LG FP770031 BLACK is a single-ingredient resin used in plastics and elastomers applications. It functions primarily as a resin, contributing to the structural properties of various formulations.

Teckrez® C95-119 is a single-ingredient binder and resin with excellent color stability, tack, and heat resistance. It offers improved flexibility, low odor, and UV resistance, making it suitable for CASE (Coatings, Adhesives, Sealants, and Elastomers) and industrial applications requiring durable and high-performance resins.