Products

Interplastics Corve8300 is a vinyl ester resin belonging to the epoxy vinyl ester and polyester chemical families, used as a binder and matrix material in composite materials and as a resin in plastics and elastomers. This non-promoted, corrosion-resistant resin is based on bisphenol A epichlorohydrin and is suitable for applications such as tank relining, pipe fabrication, and tank construction. Manufactured with FDA-approved ingredients (CFR Title 21, CFR 177.2420), it is safe for single or repeated use in food-contact articles as prescribed by regulations.

Magnum™ 342EZ ABS Resin Natural STA is a granule and pellet form resin made from acrylonitrile butadiene styrene (ABS), a styrenic polymer. It is used in industrial applications as a resin for plastics and elastomers, and contains ethylene distearamide as an additive.

Interplastics COR72-AA-451PP is a promoted, thixotropic, rigid, corrosion-resistant unsaturated polyester resin specifically designed for manufacturing liner pipes using cured-in-place techniques. It is formulated for reinforced liners, such as Premier Pipe’s Tech Liner, offering excellent chemical resistance, corrosion protection, and the ability to maintain structural integrity under challenging conditions.

Interplastics Polymer Concrete Resin COR07-202-1185 is a polyester-based resin, with styrene as the carrier and N,N-dimethylaniline (DMA) as a key chemical component. It is a liquid resin primarily used in industrial applications within the plastics and elastomers sector. The product complies with multiple certifications, including SARA 304, SARA 313, SARA 302, and SARA 311/312, as well as the Clean Air Act (CAA) Section 112 and Clean Water Act (CWA) Sections 311 and 307. It is TSCA-listed and TSCA-exempt in the USA.

ChopVantage® HP 3790 1/8 IN is a chopped strand for reinforcing thermoplastic polyester, offering high reinforcement in PBT, PET, and other resins, used in applications like transportation and electronic components.

Eplamid 66 GFS 50 HS BK Q2F002 is a polyamide 66 (PA 66) resin reinforced with 50% glass fiber, containing calcium aluminum borosilicate and classified under the polyamides chemical family. This material features heat-aging stabilization and lubrication for injection molding, making it ideal for plastics and elastomers applications.

Eplamid 6 GFS 60 HS BK Q2G001 is a polyamide 6 (PA 6) resin reinforced with 60% glass fiber, containing calcium aluminum borosilicate and classified under the polyamides chemical family. This material features heat aging stabilization, enhanced mechanical properties, and lubrication for injection molding, making it ideal for plastics and elastomers applications.

Eplamid 6 GFR 15 BK Q1B502 is a polyamide 6 (PA 6) resin reinforced with 15% glass fiber, composed of calcium aluminum borosilicate, and classified under the polyamides chemical family. This heat-stabilized and lubricated material is designed for injection molding and is primarily used in plastics and elastomers applications.

BYK-1797 is a silicone-containing, highly effective defoamer and air release agent for solvent-borne, high-solid, and solvent-free 100% UV printing inks, overprint varnishes, and PUR-based thermosets. It also serves as a process additive for thermoset resin systems and polishes, including Pickering emulsions.

R. J. Marshal ULTRA 100 is a product designed for end uses where contact with sensitive skin is expected, such as bath mats.

Pulse™ 2000EZ Engineering Resin Natural / STA is a resin in granule and pellet form, composed of polycarbonate (PC) and 2-propenenitrile polymer with 1,3-butadiene and ethenylbenzene, incorporating carbon black. The product is odorless and designed for use in composite materials functions, including resins, binders, and matrix materials, as well as plastics and elastomers applications. It complies with SARA 311/312 regulations and is listed on the TSCA inventory in the USA. It is also listed under California Proposition 65.

Ricon® 157 is a low molecular weight, liquid polybutadiene resin with moderately high vinyl functionality, offering good reactivity, exceptional hydrophobicity, and excellent processing characteristics. Its polymeric structure ensures compatibility with saturated and unsaturated elastomers. As a Type II coagent, it provides good crosslink densities without impacting the cure rate, making it ideal for extrusions and moldings requiring higher crosslink density and improved processing.

NAN YA NPEL-128 is a liquid resin made from bisphenol-A and epichlorohydrin. It is recognized as a standard form, with variations developed for specific applications. Cured NPEL-128 provides high-quality, high-purity properties, including maximum mechanical strength, good chemical resistance, and excellent heat resistance.

Wingtack® 10 is a yellow liquid aliphatic C5 petroleum hydrocarbon resin used as a binder and resin in plastics and elastomers applications. It is compliant with chemical inventories such as AICS (Australia), DSL (Canada), and TSCA (USA). This liquid aliphatic resin features low color and specific gravity, offering excellent polymer compatibility, enhanced tack, improved flexibility, and optimized low-temperature properties.

Interplastics Sil17DA-2618 Flexible Resin is a polyester-based flexible resin used in plastics and elastomers applications.