Enhanced TDS
Identification & Functionality
- Manufactured By
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Polymers & Resins
- Cure Method
- Coating End Applications
- Use Level
- 0.5 - 2% (Powder Coatings), 0.1 - 0.3% (Printing Inks and Overprint Varnishes), 1 - 10% (Liquid Coatings)
- Product Application
Liquid Coatings
Special Features and BenefitsThe additive improves scratch resistance, creates a soft feel effect and has a matting effect. Main application area – solvent-free, radiation-curable coating systems.
Incorporation and Processing Instructions
The additive is preferably incorporated into the coating at the end of the production process at a moderate shear rate.Printing Inks and Overprint Varnishes
Special Features and Benefits
The additive increases surface slip and improves abrasion resistance in solvent-free, radiation-curable printing inks and overprint varnishes.Incorporation and Processing Instructions
The additive is preferably incorporated into the coating at the end of the production process at a moderate shear rate.Powder Coatings
Special Features and Benefits
The additive is recommended for matting powder coatings and it also improves surface protection.
Recommended Use
Ceraflour® 950 is recommended for powder coatings based on polyester, polyester/epoxide, acrylate, polyurethane and epoxides.Incorporation and Processing Instructions
Ceraflour® 950 should be mixed with resin, hardener, pigments and other additives using a high-speed mixer and extruded along with all components.
Properties
- Physical Form
- Appearance
- Micro powder
- Typical Properties
Value Units Test Method / Conditions Density 0.95 g/cm³ - Particle Size Distribution (D50) 9 μm Laser Diffraction Analyzer, Volume Distribution Particle Size Distribution (D90) 15 μm Laser Diffraction Analyzer, Volume Distribution Melting Point 135.0 °C - - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Flash Point 255 °C Pensky-Martens Closed Cup Melting Point 135 °C Density (at 20°C, 1013 hPa) 0.95 g/cm³ - Dust Deflagration Index (Kst) max. 300 MB/s - Minimum Ignition Energy max. 5 mJ - Appearance Micropowder - - Color White - - Dust Explosion Class St2 - - Flammability (solid, gas) Combustible Solids - - Immiscible In Water - - Odor Characteristic - - pH (at 20°C) Insoluble - - - Composition Data
Micronized, modified HD polyethylene wax
Regulatory & Compliance
- OEM Specifications
Storage & Handling
- Storage and Transportation
Temperature sensitive. To be stored and transported at a temperature below 50 °C.